N10 G95 G90 F0.1 M3 S1000    	      ;定义切削参数,进给0.1mm/r,主轴正转1000r/min

N20 T4 D1                             ;调用切槽刀

N30 G0 X100 Z5

N40 CYCLE93 (35, -20, 30, 25, 12, 15, 16, -2, -2, 2, 2, 0.1, 0.1, 5, 1, 15,0) ;调用cycle93切槽循环

N50 G0 X100 Z100                      ;退刀

N60 M30                               ;程序结束