3.3 Tool offset table

Tool information:

1. Name: tool name

2. Type:

3. Tool group: tool group number;

4. Cutting edge number: 1-9, for different tool types, the cutting edge positions are different, so is the radius.

Standard information:

1. L1_X: X direction length compensation value (radius value);
2. L2_Z: Z direction length compensation value;
3. Radius: the tool tip radius value.
Extended Information:
1. Wear L1_X: X direction length wear value (diameter value);
2. Wear L2_Z: Z direction length wear value;
3. Wear radius: radius wear value.

                               Fig.3.1 Tool length compensation values

                                Fig.3.2 Cutting edge position